Publicité
GENERAL ASSEMBLY INSTRUCTIONS
A Phillips head screwdriver is required.
1
6
11
12
16
17
21
22
WARNING:
SURE THE PLUG IS DISCONNECTED BEFORE ASSEMBLING THE WET/DRY SHAMPOO
VACUUM. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE TO RAIN.
UNPACKING YOUR WET/DRY SHAMPOO VACUUM & GENERAL ASSEMBLY
1. Verify that the power cord is disconnected from the outlet (Fig. 1).
2. Undo the latches (Fig. 2).
3. Lift the powerhead off the collection tank (Fig. 3).
4. Remove the contents from inside the collection tank; make sure you have all contents as listed
on page 8.
5. Turn the collection tank upside down and insert the two front caster feet into the slots on the
collection tank and tighten with supplied screws. Verify that the casters are mounted correctly.
Do not over-tighten the screws (Fig. 4).
2
3
8
7
13
18
DO NOT PLUG THE POWER CORD INTO A POWER OUTLET. MAKE
4
9
14
19
10
5
10
15
20
①
Publicité
