Publicité
EN
12
A
Thigh strap
(S = Art. no.: TK1090S; L = Art. no.: TK1090L)
14
Ankle wrap
(S = Art. no.: TK1060S; M = Art. no.: TK1060M; L = Art. no.:
TK1060L)
15
C
B
D
Now push the clamp spring (D) by pressing both tabs to-
gether at the spring tightly onto the rear wheel such that
the rod can no longer be moved (photo. 15).
Handle
(Art. no.: TK1045)
16
16
Drive Medical GmbH & Co. KG | As per: 19.03.2024 | Errors and alterations excepted
13
Rear
Front
The thigh straps work
best
when
they
are
mounted behind the hip
belt on the upper frame.
The clamps differ from
the clamps of the other
accessories,
however
they are mounted in the
same way (photo. 14).
Mounting the ankle wraps
Insert the end of the rod
from the opposite side of
the clamping ring (B) into the
hole (C) of the rear wheel.
Now insert the end of the
rod with the clamping ring
(B) into the hole of the front
wheel such that the clamp-
ing ring lies flat against the
wheel.
Open the clamp by loos-
ening the screw and swiv-
el it downwards.
Then swivel the swivel
bracket upwards (photo.
16).
17
Adjustment of accessories (optionally
available)
Forearm support
(S = Art. no.: TK1035S; L = Art. no.: TK1035L)
18
K
• Rotation of the arms angled inwards or outwards
• Adjustment of the arm support forward or backwards
2. To adjust the height of the forearm support, press the
button (L), adjust the forearm support in the desired
position, and release the button. The arm support is
correctly locked when the button audibly clicks into
place (this is facilitated by slightly raising or lowering
the arm support) (photo. 19).
19
M
Q
O
L
3. The screw (M) is used to adjust the length of the handle
for different forearm lengths and the rotation in an an-
gle from left to right.
4. The arm strap (N) and wrist strap (O) secure the user's
arms. Use of the wrist strap prevents the arm from acci-
2. Position the clamp of the
forearm support on the
oval upper frame, swivel
the star screw upwards
and tighten.
3. It is recommended to
mount the forearm sup-
port in front of the main
frame tube (photo. 17).
1. Loosening the screw (K)
enables a variety of ad-
justments: (photo. 18).
• Adjustment of the arm
supports towards/away
from the body
• Rotation of the arms an-
gled upwards or down-
wards
N
K
P
Instructions for use TREKKER GT
Publicité
