Publicité
der to fold it up. Lift both bars (J) and collapse the frame
as shown (photo. 6).
6
J
Maintenance instructions
• Regularly check the metal and screw connections
for wear and stability and ensure stability. Tighten
screws, if necessary.
• Check in particular that the wheel locks have clicked
into place. Contact the responsible dealer if a connec-
tion is not in proper form.
• In the event of defects, contact your specialist dealer
from whom you purchased this product.
• Check the condition of the wheels regularly. They are
„"fail-safe"", meaning that you do not have to check
air pressure or fi ll them with air. Always check the tires
for cracks or other damage, however.
• Necessary repairs/maintenance may be performed
only by trained personnel.
Cleaning / Disinfection
• Clean regularly by hand with a moist cloth!
• Do not use any aggressive cleaning agents!
• Do not use abrasive cleaners!
• Do not use any high-dose chlorine and vinegar-based
cleaners!
• To disinfect, a spray disinfectant can be used such as
Descosept AF or Bacillol AF.
Mounting of accessories (optionally
available)
General
Accessories can be attached to the frame and adjusted
depending on the desired therapy, the user's motor skills,
and the accessory selection.
Forearm support
(S = Art. no.: TK1035S; L = Art. no.: TK1035L)
Mounting:
1. Open the clamp by loosening the screw and swiveling
Drive Medical GmbH & Co. KG | As per: 19.03.2024 | Errors and alterations excepted
it downwards. Then swivel the swivel bracket upwards
(photo. 7).
2. Position the clamp of the forearm support on the oval
upper frame, swivel the star screw upwards and tight-
en (photo. 8).
7
3. It is recommended to mount the forearm support in
front of the main frame tube (photo. 9). This entails a
stable position and off ers enough space for mounting
the other accessories. For users with slim bodies, the
forearm supports can be mounted on the inside (pho
to. 10).
9
Hip belt
(S = Art. no.: TK1080S; M = Art. no.: TK1080M; L = Art. no.:
TK1080L)
11
Seat harness
(S = Art. no.: TK1070S; L = Art. no.: TK1070L)
When the seat is intended to support a forward inclina-
tion, mount the accessories with both clamps and adjust-
ing rods (A) at the end of the upper frame (photo. 12/13).
EN
8
10
The hip fi xation aid (hip
belt) is mounted direct-
ly behind the main frame
tube.
Ensure
that
"Top" marking on the back
cushion is facing forward
and that the straps need-
ed for securing the back
cushion
run
behind
(photo. 11).
Instructions for use TREKKER GT
the
it
15
Publicité
