Publicité
EN
• The product should not be exposed to temperatures
above 60°C for long periods of time (for example, use
in a sauna, etc.).
• Prior to each use, ensure that your product is intact
and all adjustable parts are properly secured.
• Check the screws on the product regularly and tigh-
ten, if necessary!
• The correct use of the product requires accurate and
careful training of the caregiver.
• Users who have diffi culty reading must have the ins-
tructions for use read to them in order to understand
how to handle the product.
• For indoor use only!
• Use only under supervision.
Preparing for use
Raise the upper part of the frame into the upright position
(photo. 1). Both bars automatically click into the recesses
of the frame.
Warning! Ensure that the bars have properly snapped into
place to prevent the product from unintentionally collaps-
ing!
1
2
Adjusting the Trekker GT base frame
14
Drive Medical GmbH & Co. KG | As per: 19.03.2024 | Errors and alterations excepted
Important: The size M and
L frame is foldable; the size
S frame is not foldable!
Most of the accessories
(optionally available) are
secured to the frame using
clamps and adjusting rods
(photo. 2).
3
J
Important
Ensure that the levers have correctly snapped into
place (a clicking sound can be heard when they snap
into place) and that the frame can no longer be moved.
Adjusting the wheels (brakes and lock – direction of
movement)
4
H
E
F
I
1. Each wheel can be locked individually for directional
stability. This locking supports the user in learning to
walk in a straight line. Locking both rear wheels pre-
vents sideways slipping when walking, while the front
wheels are still steerable. To lock the wheels, the lock-
ing lever (E) must be pushed into the hole (F) of the
wheel (photo. 4).
2. Each wheel can be adjusted such that it rolls in only
one direction. This is useful for users who have diffi -
culties walking and involuntarily roll backwards. To
do this, push the pin (G) downwards until it clicks into
place. When rolling forward, the wheel makes a click-
ing sound (photo. 5).
3. Using the brake pedal (H) the speed of the gait trainer
can be adjusted in increments or it can be completely
braked. The further the pedal is pressed downward,
the greater the rolling resistance. Press the pedal all
the way down to brake the gait trainer (photo. 4).
Folding for transport
The Trekker GT gait trainer (only sizes M and L) can be
folded up for easier transport. To do this, bring the acces-
sories and upper frame into the lowest position.
It is recommended to stand behind the gait trainer in or-
Adjusting the frame with
handle
By pressing and holding
the lever (J), the desired
height can be adjusted in
increments.
Now release the lever (J)
(photo. 3).
5
G
Instructions for use TREKKER GT
Publicité
