Publicité
Screw the chopper-grinder blade
4.
insert and the chopper-grinder at-
tachment in tightly.
→ Fig.
24
– The
and
match up.
– You can only connect the chop-
per-grinder blade insert to the
main unit when the chopper-
grinder attachment is fully
screwed on.
Turn the chopper-grinder access-
5.
ory upside down.
→ Fig.
25
Place the chopper-grinder access-
6.
ory onto the main unit and rotate in
a clockwise direction until it locks
into place.
→ Fig.
25
Set the rotary switch to the recom-
7.
mended speed.
→ Fig.
26
Tip: Processing can also take
place with instantaneous switching.
→ "Using instantaneous switching",
Page 35
Process the ingredients until you
8.
achieve the required result.
To end the operation, set the rotary
9.
switch to .
→ Fig.
27
7.11 Emptying the chopper-
grinder accessory
Requirement: The appliance has
stopped.
Turn the chopper-grinder access-
1.
ory anti-clockwise and remove it
from the main unit.
→ Fig.
28
Turn the chopper-grinder access-
2.
ory over and unscrew the chopper-
grinder blade insert.
→ Fig.
28
markings must
Cleaning and servicing en
Empty the chopper-grinder attach-
3.
ment with the processed food.
8 Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
8.1 Dishwasher-safe compon-
ents
Find out here which components can
be put in the dishwasher.
ATTENTION!
Some parts may be damaged if they
are put in a dishwasher.
▶
Only put dishwasher-safe parts in
the dishwasher.
▶
Only use programmes that do not
heat the water above 60 °C.
▶
Do not wedge plastic parts in the
dishwasher.
This overview describes the cleaning
process for the components.
→ Fig.
29
8.2 Cleaning products
Find out here which cleaning
products are suitable for your appli-
ance.
ATTENTION!
Using unsuitable cleaning agents or
incorrect cleaning may damage the
appliance.
▶
Do not use cleaning agents con-
taining alcohol or spirits.
▶
Do not use sharp, pointed or metal
objects.
▶
Do not use abrasive cloths or
cleaning agents.
37
Publicité
