Publicité
2 POWERING UP THE UNIT
See Warning No. 8 on page 1.
1
Make sure the power plug is functional.
•
Make sure the power plug is undamaged. Make sure the power plug is free of foreign matter and debris.
2
Plug the power plug into an electrical outlet.
3
Verify that the lock switch key is turned to the "open" position.
•
If in "lock" position, turn the lock switch key to "open".
4
Slide the power switch to the "on" position.
3 CHECK THE UNIT
1
4 ADJUSTING FOR CORRECT PILLOW HEIGHT
5 ADJUSTING THE RECLINING ANGLE
Press reclining
to adjust the angle of the backrest.
•
With the button held down, movement will continue until a "beep-beep-beep" sound indicates the backrest has been raised or
lowered as far as possible.
Approx. 120˚
* The reclining operation is a function that adjusts the angle of the backrest. Avoid using it for any other purposes, such as
continuous up/down operation etc.
1
Make sure the chair covering is free of rips or
3
tears.
2
Make sure there are no obstacles between
the parts of the unit.
3
Make sure the massage heads are in the
retracted position, i.e. they are parked to the
left and right in the upper part of the backrest.
If not retracted, press
retracted position.
See Warning No. 14 on page .
Adjust the pillow height so that the bottom edge
of the pillow is at ear level.
•
If positioned too low, the pillow can lessen the effect of massage around the
neck area.
Velcroes
twice to return the massage heads to the
Approx. 170˚
10
Publicité
