Publicité
EQ 0600BL
ALU4 mode: need input A, B, D value of wheel.
ALU5 mode: need input A 1 , B, D 1 value of wheel.
STA mode: need input A , D , value of wheel.
3. press START to run the wheel balancer after input the wheel parameter. The machine will
display the unbalace value after rotation stop. Press FINE to check the pratical value.
4. rotate the wheel by hand until all the position LEDs light and the the buzzer will ring three times
to indicate the unbalance position.
The two method to apply the weight:
4.1 apply the weight at 12 clock postion when clamp the weight or stick the weight at outside of
rim under ALU2 and ALU4.
4.2 if stick weight on the rim plane inside of spokes. For example, stick the weight inside under
ALU1, ALU2 & ALU5:
MANUAL MOTORIZED WHEEL BALANCER LED
SCREEN
B
B
Publicité
