CLAS B.LINE EQ 0600BL Manuel D'utilisation page 27

EQ 0600BL
The operation steps of each balance mode:
1. press ALU button to choose proper balance
mode according to the rim shape.
2. input the size of rim. Need input deffi rent the
size of position of rim under balance mode. See
the below picture to show the size of position.
This machine can input A (or A1, A2) & D value
automaticlly and need input B value manual.
The method of input A o r A1, A2 ) and D (or D1,
Pull out the scale and the machine will measure A (or
A1) and D (or D1) value automaticlly. Pull out the scale
to the position and contact the rim plane by the scale
head then keep it 2 seconds. The A (or A1) and D (or D1) value will be confi rmed and input. If
need measure A2 and D2 value under this balance mode, t he machine will enter the situation to
measure them automaticlly. Pull out the scale to the A2 position and contact the rim plane then
keep it 2 senconds. The A2 and D2 value will be confi rmed and input.
The method of input B:
Press ABD botton to shift B value input and press
DYN mode: need input A, B, D value of wheel.
ALU1 mode: need input A 1, D 1, A2, D2 value of wheel
ALU2 mode: need input A 1 , B, D 1 value of wheel.
ALU3 mode: need input A, D , A2, D2 value of wheel.
MANUAL MOTORIZED WHEEL BALANCER LED
SCREEN
to shift B value input and press to shift B value input and press
B
B
or or or to input B value. to input B value. to input B value.