Publicité
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
Such a safety instruction indicates a potentially hazardous situation which, if not
avoided, may result in serious injury or even death.
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety notice designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Irrespective of all safety regulations, their sound common sense and corresponding technical
suitability/training are and remain the most important safety factor in the error-free operation of
the machine. Safe working depends first and foremost on you!
TRANSPORT
Damaged or not sufficiently viable hoists and lifting devices can cause serious injury or
even death. Always check hoists and load lifting devices for adequate load-bearing
capacity and perfect condition, carefully fasten the loads and never keep them under
suspended loads.
To ensure proper transport, also observe the instructions and information on the transport
packaging regarding centre of gravity, attachment points, weight, means of transport to be used
and the prescribed transport position, etc. Lifting and transporting the machine may only be
carried out by qualified personnel with appropriate training for the lifting equipment used.
NOTE:
To transport the machine, you need a forklift truck with the appropriate load capacity and a
fork of at least 1200 mm length. The fork of the truck should be positioned under the machine.
If you are using a crane, proceed as follows:
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
W A R N I N G
C A U T I O N
N O T E
W A R N I N G
Transport the machine in its packaging to the
installation site. To manoeuvre the machine in the
packaging, a pallet truck or a forklift with
appropriate lifting power can be used.
• Prepare ropes or belts (A) with appropriate load-
bearing capacity and length
• Hook the ropes to the crane hook (B)
• Attach the ropes to the lifting points (C)
• Position the crane so that the machine can be lifted
without tipping
• Gently lift the machine to avoid shocks and load
fluctuations and carefully transport it to the
installation site
TRANSPORT
HOB410PRO_400V | HOB410PROSMW4_400V
35
Publicité
