Publicité
Code
Description
E-01
Dust-box is not
detected.
E-02
Low Battery
E-03
Device fault :
Drop sensor
E-04
Device fault :
Bumper
E-05
Device fault :
PSD
E-06
Device fault :
Gyro sensor
E-07
Device fault :
Driving motor
E-08
Device fault :
Charging
E-09
Device fault :
Side-brush
E-10
Device fault :
Suction motor
What user has to do
1. Check dust-box is inserted.
1. Try to charging the robot
1. Clean the drop-sensor-windows under
the robot
1. Check if something is stuck in bumper
1. Clean the front-windows
1. Turn off and try again
1. Check if something is stuck in wheels
1. Clean charging terminal of robot and
charging station
2. Turn off and try again
1. Check if something is stuck in brushes
1. Check if something is blocking suction
hole.
2. Turn off and try again 10minute later
EN
Require
Repair
45
Publicité
