Publicité
DESCRIPTION
1.
Rowenta Robot (TOP)
a. START/STOP
b. Mode
c. Charge
d. Lateral Sensor Window
e. Bumper
f. Opening Logo
g. LED Display
2.
LED Display (or 1g)
a. Smart Mode
b. Random Mode
c. Spot Mode
d. Floor ionizer*
e. Battery charge
f. Time
g. Schedule
h. Daily cleanup
i. Charge
j. Mute
3.
Rowenta Robot (BOTTOM)
a. Main power switch
b. Joint brush
c. Lateral brush
d. Floor sensors
e. Charging Pad
f. Battery Compartment
4.
Remote Controller
a. Power / Energy Saving Mode
b. Direction Buttons
c. Start/Pause
d. Stop
USER INSTRUCTION
Installing the charge base (5)
Plug the adapter to the charge base
Plug the adapter(7) into the outlet located at the back of the charge base and insert the
electric cord into the slot.
Install on a flat surface
Place the charge base against a wall, on a flat surface.
Install in a place free of any physical obstacles
Install the charge base in a place that is free of obstacles (including carpets), leaving at least
1 meter (3 feet) of free space to the left and right, and 2 meters (6 feet) to the front.
34
* According to model: these systems are specific to certain models or are accessories availabes as an option
(Fig. 1)
e. Smart Mode*
f. Random Mode
g. Spot Mode
h. Manual Mode
i. Vacuuming power control (P1, P2,
P3)
j. Time
k. Schedule (Programming)
l. Daily cleanup
m. Language*
n. Mute
o. Charge
5.
Charge Base
a. Charge LED
b. Power LED
6.
Dust Box
a. Dust Box
b. Box Lid Open Button
c. Dust Box Lid
d. Handle
e. Foam Filter
f. (H)EPA Filter*
g. (H)EPA Filter Case
7.
Adapter
8.
Foam filter
9.
(H)EPA Filter*
10. Two (2) Lateral Brushes*
11. Virtual barrier*
(Fig. 2)
(Fig. 3)
Publicité
