Publicité
Using the remote control
Press the <RANDOM> button on the remote control; the cleaning mode will change to
Random.
Press the <START/PAUSE> button on the remote control; the vacuum cleaning process will
start automatically.
Press the <STOP> button on the remote control during cleanup, and the robot will stop.
Using the buttons on the main body
Press the <MODE> button on the main body, and select Random mode.
Press the <START/STOP> button on the main body; the vacuum cleaning process will start
automatically.
Spot Mode (targeted cleanup)
For localized vacuum cleaning.
The robot carries out a spiral movement within a 1 m (3 ft) diameter approximately in order
to clean intensively in a previously defined area.
Using the remote control
Press the <SPOT> button on the remote control; the cleaning mode will change to Spot.
"Spot Mode" Message
Press the <START/PAUSE> button on the remote control; the vacuum cleaning process will
start automatically.
Press the <STOP> button on the remote control during cleanup, and the robot will stop.
Using the buttons on the main body
Press the <MODE> button on the main body, and select Spot mode.
Press the <START/STOP> button on the main body; the vacuum cleaning process will start
automatically.
Press the <START/STOP> button on the main body during cleanup, and the robot will stop.
Manual Mode
The robot moves by remote control
Moving the robot with the remote control
Press the <MANUAL > button(4h) on the remote control.
Direction buttons
SCHEDULE (PROGRAMMING)
You can program the robot so that it vacuums at precise moments, even when you are not
home.
- Current Time Setting
WARNING: the robot can only be programmed while it is on its charge base and if
the latter is connected to the mains.
38
, ,
(4b) on the remote control to move the robot as desired.
Publicité
