Publicité
Using the 2-in-1 crevice and
brush attachment
NOTE
►
Switch the appliance off before attaching
or removing the 2-in-1 crevice and brush
z
attachment
.
The appliance's 2-in-1 crevice and brush attach-
z
ment
has two different nozzles for different
applications. Choose the appropriate nozzle
depending on your needs:
Brush nozzle
Use the brush nozzle to clean soft and/or
delicate surfaces.
Crevice nozzle
Use the crevice nozzle to clean narrow and
hard to reach locations.
■
Attach the 2-in-1 crevice and brush attachment
z
to the hand element
■
Alternatively, you can attach only the brush
nozzle or only the crevice nozzle to the hand
3
element
.
■
When you are done using it, pull the 2-in-1
crevice and brush attachment
nozzle off the hand element
Using the hand element
1) Remove the hand element
e
element recess
Assembly/disassembly.
2) If necessary, attach the 2-in-1 crevice and
brush attachment
Alternatively, you can attach only the brush
nozzle or only the crevice nozzle to the hand
3
element
.
3) Press the On/Off switch
3
element
to start vacuuming the desired
areas. The charge indicator lamp
up blue during operation.
4) When you are finished vacuuming, press the
On/Off switch
2
indicator lamp
SHSS 28 A1
3
.
z
or the single
3
.
3
from the hand
as described in the section
z
to the hand element
2
on the hand
2
lights
2
again. The charge
switches off.
Cleaning and maintenance
WARNING! RISK OF INJURY!
►
Always unplug the mains adapter
mains power socket. Pull the barrel plug
out of the charging socket
before cleaning the cradle
►
Always remove the hand element
the hand element recess
0
rod
before cleaning
-- the hand element
-- the handle rod
-- the rotary brush
ATTENTION! PROPERTY DAMAGE!
►
Do not use abrasive or aggressive cleaning
materials. They can damage the surface of
the appliance!
NOTE
►
The LED light
The LEDs cannot be replaced!
3
.
u
p
on the cradle
o
.
3
e
on the handle
3
,
0
, or
r
.
t
is maintenance-free.
GB│IE
from the
i
o
from
│
9
■
Publicité
