Publicité
8. Cover the Junction box top and tighten with assembly screws (4pcs).
* Caution: If assembly screws are not firmly assembled, it causes water leakage.
9. Set the camera's orientation and tighten the Lock/Unlock screws using hex
wrench.
10. If necessary, open the opening cover and connect the video sub-out cable for
OSD menu setting.
11. After all the setting, close the Opening cover and tighten it.
12. Put the sunshield to the camera unit and tighten the sunshield bolts.
Hinge pin
Junction Box Top
EN
9
Publicité
