Troubleshooting - Rotel SLOWJUICER4292CH Mode D'emploi

 TROUBLESHOOTING
Phenomenon
The running ma-
chine stops sud-
denly
The volume of
juice
is too small
Juice flows out of
the mainframe
There are some
unusual noises
The container and
accessoiries are
dyed after use
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
Cause

The power plug is not
properly inserted

The amount of produce
inserted is too high

Hard fruits and vegetables
are not small enough

Continuous working time
exceeding 20 min

Materials may have been
stored in the refrigerator
too long before squeezing

The rubber pad at the bot-
tom of the squeezing cup is
not properly installed

Accessories are not properly
installed

The machine is put on une-
ven or inclined plane

Parts cause extrusion sound
during squeezing

Pulp attaches to the contai-
ner

The container and accesso-
ries are liable to be dyed if
materials with strong pig-
ments (such as carrot, spin-
ach etc.) are used for
squeezing
64
Troubleshooting method

Insert the plug firmly into the
socket

First, press «R» for 2-3 seconds to
let the produce return upwards;
then choose a function and restart
(repeat the process 3 times). If the
machine still does not work, run a
cleaning procedure and start again

Hard fruits and vegetables (such as
carrots) shall only be squeezed af-
ter being cut into strips

Allow the machine to cool down
for 10 min and restart if necessary

The juice amount will be increased
if the materials are squeezed after
being immersed in clear water for
sufficient time

Use fresh fruits or vegetables

Please reinstall the squeezing rub-
ber pad by referring to the installa-
tion method

Inspect whether the accessories
are properly installed after the
machine stops

Please put the machine on a plane
surface

The sound is caused by the extru-
sion of the juice out of fruits and
vegetables: please do not worry
about it

Clean the machine straight after
use

Clean the machine with regular
detergent after use