Anomalies And Solutions - De Dietrich DKR7580A Guide D'utilisation

6
•

ANOMALIES AND SOLUTIONS

- "Auto Stop" displays. This function
stops heating the oven if you forget to
switch it off. Turn your oven to STOP.
- Default code starting with "F". Your
oven has detected a problem.
Stop the oven for 30 minutes. If the fault
is still there, cut off the power supply for at
least one minute.
If the fault persists, contact the Customer
Service Department.
- The oven is not heating. Check that
the oven is correctly connected and that
your installation's fuse is not out of
service. Check that the oven is not set to
"DEMO" mode (see settings menu).
- The oven light is not working.
Replace your installation's bulb or fuse.
Check that the oven is correctly
connected.
- The cooling fan continues to operate
after the oven stops. This is normal. It
can work for up to one hour after cooking
to cool down the oven. If it continues
beyond this, contact the Customer
Service Department.
- The pyrolysis cleaning cycle does
not begin. Verify that the door is locked.
Call the Customer Services Department
if the problem persists.
- The "door locking" symbol flashes
in the display. Door locking fault.
Contact the
Department.
- There is water on the floor of the
oven.
- The boiler is scaled. Follow the
DESCALING procedure. If the fault
persists, call the After-Sales Service.
28
Customer Services