Replacing The Light Bulb; "Cleaning" Function; Pyrolysis - De Dietrich DKR7580A Guide D'utilisation

5
•
CARE

REPlACING THE lIGHT bUlb

Warning
Make sure the appliance is
disconnected from the power before
replacing the bulb in order to avoid
the risk of electric shock. Carry out
the operation when the appliance has
cooled.
bulb specification:
25 W, 220-240 V~, 300°C, G9.
You can replace the bulb yourself. First
disassemble the left-hand side shelf
support.
The bulb is accessible inside the oven.
Use the plastic stop as a lever to remove
the glass.
Change the bulb (use a rubber glove to
facilitate its removal) then reattach the
glass.
Plug your oven back in.

"ClEANING" FUNCTION

(the cavity)
Remove the accessories and
supports from the oven before
beginning pyrolysis cleaning. before
starting a pyrolysis cleaning cycle,
make sure that any accessories that
are not pyrolysis safe have been
removed from the oven (sliding rails,
baking trays, chrome-plated grills,
and so on) as well as any cookware.
PyROlySIS ClEANING
This oven is equipped with a pyrolysis
cleaning function:
Pyrolysis is a cycle during which the
oven cavity is heated to a very high
temperature in order to eliminate soiling
from splattering and spills.
Before starting pyrolysis cleaning,
remove any large overspills, if any.
Remove the excess grease on the door
using a damp sponge.
As a safety measure, cleaning only
occurs after the door locks automatically;
it is impossible to unlock the door.
24