Publicité
USING THE CHRONOGRAPH
I. M
EASURING A SINGLE SHORT TIME
Your chronograph is equipped with safety pushpieces, which ensure
enhanced water-resistance and provide effective protection against shocks.
Consequently, the pushpieces can only be operated after unscrewing the
retaining ring.
NB: it is recommended to keep the pushpieces screwed in when the chrono-
graph is not in use.
1. Press pushpiece A to start the chronograph. Hand 3
keeps track of the measured time in seconds.
2. Stop the measurement by pressing pushpiece A once
more. The measurement is made in hours (totalizer 1),
minutes (totalizer 2), seconds and
(hand 3).
3. Reset the chronograph to zero by pressing pushpiece B.
/
of a second
1
4
16
II. M
EASURING AN INTERRUPTED SHORT TIME
1. Press pushpiece A to start the chronograph.
Hand 3 shows the measurement in seconds.
2. To interrupt the measurement, press pushpiece A
once more. To restart the time measurement, press
pushpiece A. This procedure makes it possible to add
up several short times.
3. The chronograph is reset to zero by pressing
pushpiece B, once the fi nal measurement has been
stopped.
17
Publicité
