ISANTA SENCO S45CNR Mode D'emploi page 6

TECHNICAL PARAMETER
Characteristic
GB
Compressed Air pressure
Outline Dimension (L×H×W)
Nail Length Range
Tool Weight
Air Inlet
Air Consumption
PACKING LIST
Description
S45CNR coilnailer
S5 Hex Key
S4 Hex Key
S3 Hex Key
Air Tool Oil
Operating instruction
Safety glasses
NOISE INFORMATION
These noise characteristic values are in accordance with EN 12549:1999
LpA, 1s, d=84dB
LwA, 1s, d=97dB
These values are tool-related characteristic values and do not represent noise developed at the
point of use. Workplace design can also serve to reduce noise levels, for example placing work
piece on sound-damping supports.
VIBRATION INFORMATION
These values are in accordance with ISO 8662-11:1999
Vibration characteristic value ( m/s2 ) = 8,22
This value is a tool-related characteristic value and does not represent the influence to the
hand-arm-system when using the tool.
6
Value
4.8-8.3 bar
300 × 310 × 110 mm
22-45 mm
2.75Kg
1/4"NPT
68 l/min at 5.52 bar
Q'ty
1
1
1
1
1
1
1
4