Publicité
OPERATING INSTRUCTIONS
MODEL DC3010A
Refer to drawing 10011797 at the end of this section for dimensions and connector locations.
Operation of the Model DC3010A is quite simple. The input signal is fed into the jack (J1) marked INPUT
and the output is taken from the jack (J2) marked OUTPUT. The input and output jacks on the unit are Type
N (Female).
Forward coupled output is taken from the jack (J3) marked FWD, and Reverse coupled output is taken from
the jack (J4) marked REV. Both coupled output jacks on the unit are Type BNC (Female).
See Specification Sheet for detailed specification.
Rev A
Do not exceed maximum power ratings. Do not drop. Internal
components are fragile.
WARNING:
1
Publicité
