Fit The Bark Control Collar - Petsafe PBC17-16193 Manuel D'utilisation

Fit the Bark Control Collar

Important: The proper fit and placement of your Bark Control Collar is important for
effective operation.
To assure a proper fit, please follow these steps:
1. Make sure that the Bark Control Collar is turned off.
2. Start with your dog standing comfortably (A).
3. Place the Bark Control Collar high on your dog's neck close to the
ears. Centre the unit underneath your dog's neck with the spray
nozzle facing upward (B).
4. Check the tightness of the Bark Control Collar by
inserting one finger between the collar and the back
of the dog's neck. The fit should be snug but not
constricting (C).
5. Allow your dog to wear the collar for several minutes,
then recheck the fit. Check the fit again as your
dog becomes more comfortable with the Bark
Control Collar.
6. Trim the collar as follows (D):
a. Mark the desired length of the collar with a
pen. Allow for growth if your dog is young or
grows a thick winter coat.
b. Remove the Bark Control Collar from your dog
and cut off excess.
c. Before placing the Bark Control Collar back
onto your dog, seal the edge of the cut collar
by applying a flame along the frayed edge.
7. The PetSafe QuickFit
®
can quickly attach and remove the Bark Control
Collar from your dog while maintaining the
desired fit. Once the fit is determined, simply use
the Snap Buckle to remove and replace the collar.
6
collar is designed so you
™
www.petsafe.net
A
B
C
D
SÍ
NO