Ensure A Proper Spray Pattern; To Insert And Remove The Battery - Petsafe PBC17-16193 Manuel D'utilisation

Ensure a Proper Spray Pattern

For the PetSafe Little Dog Deluxe Spray Bark Control Collar to perform properly, the nozzle
®
must be positioned correctly and there must be a
clear path from the Spray Nozzle to your dog's snout.
Follow these steps:
1. Make sure the PetSafe
facing upward and the Spray Nozzle is angled out
and pointing up towards the dog's snout.
2. For long-haired dogs, it may be necessary to trim
the neck hairs along the path of the spray. It is
important that the spray reaches the dog's snout to
be effective.
On/Off Battery Module
The PetSafe Little Dog Deluxe Spray Bark Control Collar is packaged with the battery module
®
installed in the "OFF" position. To activate the collar, use a coin to turn the Battery Module
counter clockwise until the arrow lines up with the "ON" position. If the PetSafe
Deluxe Spray Bark Control Collar is not going to be used on the dog immediately leave it in
the "OFF" position.

To Insert and Remove the Battery

Note: Do not install the battery while the Bark Control Collar is on your dog.
A replacement PetSafe
at www.petsafe.net to locate a retailer near you and for a listing of Customer Care Centre
telephone numbers in your area.
logo on the top of the unit is
®
battery (RFA-188) can be found at many retailers. Visit our website
®
www.petsafe.net
Little Dog
®
7