Key Defi Nitions; Fit The Bark Control Collar - Petsafe Deluxe Bark Control Collar Guide D'emploi

Key Defi nitions
Mode Switch: Adjusts the levels of
Static Correction your dog receives
when barking. This switch is also used to
turn the Bark Control Collar off, and to
test it.
Indicator Light: Indicates that the Bark
Control Collar is functioning properly in
the TEST Mode. This light also serves as
a low battery indicator.
Sound Activated Sensor: Detects the
sound of your dog's bark.
Sensor Probe: Detects the vibrations of your dog's bark.
Note: The Sensor Probe is not adjustable.
Contact Points: Deliver the safe Static Correction.
____________________________________________________________________

Fit the Bark Control Collar

Important: The proper fi t and placement of your Bark Control Collar
is important for effective operation. The Contact Points must have
direct contact with your dog's skin on the underside of his neck.
To assure a proper fi t, please follow these steps:
1. Make sure that the battery is not installed in the Bark
Control Collar.
2. Start with your dog standing comfortably.
3. Place the Bark Control Collar high on your dog's neck
close to the ears. Center the Contact Points underneath
your dog's neck, touching the skin.
Note: It is sometimes necessary to trim the hair
around the Contact Points to make sure that contact
is consistent.
Indicator
Light
Mode
Switch
www.petsafe.net
Sound
Activated
Sensor
Battery
Washers
Contact Points
Sensor Probe
YES
NO
5