Publicité
10-Installation
10-12
WARNING!
dry and leak free!
Take care these parts are never to be crushed, kinked, or twisted.
If the supply cord is damaged, it must be replaced by the service agent (see warranty
card) in order to avoid a hazard.
Note: Hygiene
nance run programme HYGIENE with no load and small amount of detergent in wash-
ing agent compartment (2) or with special machine cleaner to remove possibly corrup-
tive residues.
28
10.8 Electrical connection
Before each connection check if:
Power supply, socket and fusing are appropriate to
the rating plate.
The power socket is earthed and no multi-plug or
extension are used.
The power plug and socket are strictly according.
Only UK: The UK plug meets BS1363A standard.
Put the plug into the socket (Fig. 10-12).
GB
-
Publicité
