Publicité
7. Displayed information and symbols
The following is a list of symbols and information the measuring device can display.
MIN
Min value display
MAX
Max. value display
HOLD
Data hold function is active
ZERO
Zero adjustment symbol in the low-resistance and voltage measuring range
OL
Overload; the measuring range has been exceeded
OFF
Off position; the measuring device is switched off
Battery replacement symbol
Warning symbol for dangerous voltage (<30 V) at the test prods
Acoustic continuity check symbol
Backlight symbol
BATT
Display of battery voltage in the measuring device (battery check)
V
Direct voltage
V
Alternating voltage
mV
Millivolt (exp.-3)
V
Volt (unit of electric voltage)
Ω
Ohm (unit of electric resistance)
kΩ
Kiloohm (exp.3)
MΩ
Megaohm (exp.6)
LOCK
Symbol for permanent measurement (in the insulation measuring range)
30
Publicité
