Publicité
• Do not switch on the measuring device immediately after it has been taken from a cold to a warm environ-
ment. The condensation generated can lead to faulty measurements or even destroy the device. Allow the
device to reach room temperature before switching it on.
• Do not leave packaging material lying around carelessly. It may become a dangerous toy for children.
• For safety reasons, only use the provided measuring lines and accessories in correspondence with the
specifications of the measuring device.
• You should also observe the safety instructions in each chapter of these instructions.
6. Product description
The measuring device shows measured values and the corresponding units and symbols on the digital display. The
display for measured values comprises 4000 counts (count = smallest display value). A bargraph shows rapid chang-
es in value.
The measuring device shuts down automatically if it is not operated for about 10 minutes. This saves battery power
and thus extends operating time. Battery voltage is displayed in the "750 V~" range, which helps estimate the remain-
ing operating time.
The measuring device can be used for do-it-yourself or for professional applications.
For better readability, the measuring device can be placed ideally using the tilt stand on the back.
Rotary switch (5)
The individual measuring functions are selected via the rotary switch. The auto-
matic range selection "auto range" is active in the "400 Ω" measuring function.
The appropriate measuring range is set automatically.
If the rotary switch is set to "OFF", the measuring device is switched off. Always
turn off the device when it is not in use.
29
Publicité
