SilverCrest SSMS 600 E2 Instructions D'utilisation Et Consignes De Sécurité page 10

m WARNING! Risk of
electric shock! Never use a
damaged product . Disconnect
the product from the power
supply and contact your
retailer if it is damaged .
m WARNING! Risk of
electric shock! Do not use
the product next to a sink or in
moist areas .
Before connecting the product
to the power supply, check that
the voltage and current rating
corresponds with the power
supply details shown on the
product's rating label .
To avoid damaging the power
cord, do not squeeze, bend or
chafe it on sharp edges . Keep
it away from hot surfaces and
open flames as well .
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard .
Pull the power plug and not the
cable itself to disconnect the
product from the power supply .
Do not wrap the power cord
around the product . Connect
the product to an easily
reachable electrical outlet so
that in case of an emergency
the product can be unplugged
immediately .
Do not operate the product
with wet hands . Do not touch
the product with wet hands .
Operation
m WARNING: Potential injury
from misuse . Care shall be
taken when handling the
sharp cutting blades, emptying
the containers and during
cleaning .
GB/IE/NI 9