Publicité
Assembly
Remove all packaging material and all transport
protection locks from the unit.
A
Place the halogen heating unit on its rear side.
B
Guide the connecting cable
cess
in the base
15
C
Loosen the two tommy screws
. Place the base
9
fit perfectly into the three cavities. Ensure that the
connecting cable
12
recess
.
15
through the re-
12
.
9
from the base
13
so that the three screws
9
is routed through the lower
D
Attach the base
to the halogen heating unit
9
using the two tommy screws
E
Guide the connecting cable
clamp and the recess
15
provided.
13
through the cable
12
in the base
.
9
GB/IE
23
Publicité
