Télécharger Imprimer la page

SilverCrest SHH 1200 D2 Instructions D'utilisation Et Consignes De Sécurité page 21

Publicité

Repair of electrical equipment
Q
may only be carried out by ex-
perts who are specially trained
by the manufacturer. Improper
repair can cause considerable
danger for the device users.
FIRE RISK!
Q
Therefore, never place
the device near or under
curtains or other combustible
materials.
Avoid contacting the device
Q
by combustible materials (e.g.
textiles).
Before using the device, check
Q
it for visible damage. If the de-
vice fell down or got damaged,
do not start it.
If the power supply cable of this
Q
device is damaged it should be
replaced by the manufacturer
or by its customer service or a
similarly qualified person, to
avoid danger.
BEWARE OF HOT
Q
SURFACES!
Some parts of the product can
Q
become very hot and cause
burns. Pay particular attention
when children and vulnerable
people are present.
Repair of the device shall only be
Q
done by authorised companies
qualified in this field or by the af-
ter-sales service. Improper repair
22
GB/IE
can cause considerable danger
for the device users. Moreover, it
will void all warranty claims.
Defective components may
Q
only be replaced with original
spare parts. Only if original
spare parts are used, it is en-
sured that the security require-
ments are met.
Protect the device against hu-
Q
midity and penetration of liq-
uids.
When disconnecting, pull the
Q
power cable from the wall sock-
et by the power plug only, do
not jerk out the cable.
Do not use the device in the vi-
Q
cinity of open flames.
I n the case of faults or during
Q
a thunderstorm, pull out the con-
nector plug from the wall socket.
Use the device only when the
Q
power cable is completely run
out. Never wind the power ca-
ble around the device. Make
sure that the power cable does
not contact hot surfaces. Route
the cable so that nobody can
stumble over it.

Publicité

loading

Ce manuel est également adapté pour:

338204 2001