Publicité
•
you do not deactivate a cooking zone or change the
heat setting. After some time
hob deactivates.
The relation between the heat setting and the time
after which the hob deactivates:
Heat setting
, 1 - 2
3 - 4
5
6 - 9
The heat setting
Touch
to increase the heat setting. Touch
decrease the heat setting. Touch
same time to deactivate the cooking zone.
Activating and deactivating the outer rings
You can adjust the surface you cook to the dimension of
the cookware.
Use sensor field:
To activate the outer ring: touch the sensor field. The
indicator comes on.
To deactivate the outer ring: touch the sensor field
until the indicator goes out.
Automatic Heat Up
If you activate this function you can get a necessary
heat setting in a shorter time. The function sets the
highest heat setting for some time and then decreases
to the correct heat setting.
To activate the function the cooking zone
must be cold.
To activate the function for a cooking zone: touch
until the correct heat setting comes on. After 3
seconds
comes on.
To deactivate the function: touch
Timer
Count Down Timer
You can use this function to set how long the cooking
zone should operate for a single cooking session.
20
comes on and the
The hob deactivates af-
ter
6 hours
5 hours
4 hours
1.5 hour
to
and
at the
.
First set the cooking zone then set the function. You
can set the heat setting before or after you set the
function.
To set the cooking zone: touch
until the indicator of a necessary cooking zone comes
on.
To activate the function or change the time: touch
or
of the timer to set the time (00 - 99 minutes).
When the indicator of the cooking zone starts to flash
slowly the time counts down.
To see the remaining time: set the cooking zone with
. The indicator of the cooking zone starts to flash
quickly. The display shows the remaining time.
To deactivate the function: set the cooking zone with
and touch
. The remaining time counts back to
00. The indicator of the cooking zone goes out.
When the time comes to an end, the
sound operates and 00 flashes. The
cooking zone deactivates.
To stop the sound: touch
Minute Minder
You can use this function as a Minute Minder when the
hob is activated and the cooking zones do not operate
(the heat setting display shows
To activate the function: touch
of the timer to set the time. When the time comes to an
end, the sound operates and 00 flashes.
To stop the sound: touch
The function has no effect on the
operation of the cooking zones.
Lock
You can lock the control panel while cooking zones
operate. It prevents an accidental change of the heat
setting.
Set the heat setting first.
To activate the function: touch
seconds. The Timer stays on.
To deactivate the function: touch
heat setting comes on.
When you deactivate the hob, you also
deactivate this function.
again and again
.
).
. Touch
or
.
.
comes on for 4
. The previous
Publicité
