ACCESSORIES -
P
LATE TO BE CEMENTED
N
YLON RACK MODULE 4
with zinc plated angle Iron, in 1 m. bars.
Ideal for gates up to 1,000 kg / 2,200 lbs weight.
R
ADIO TRANSMITTER MOON
MOON 433 - MOON 91
433 code ACG6081 433 code ACG6082
91 code ACG7025 91
code ACG7026
S
PARK
In order to make the systems mentioned above give the best
performances, you need to install an antenna tuned on the frequency of
the radio receiver installed.
N.B. Pay attention to not let the central wire of the cable to came
Into contact with the external copper sheath, since this would
prevent the antenna from working.
Install the antenna vertically and in such a way the remote control can
reach it.
SPARK ANTENNA 91
SPARK ANTENNA 433
SPARK BLINKER WITH IN-BUILT INTERMITTENT CARD
For the connections and the technical data of the optional equipments follow the relevant
handbooks.
code ACG8107
code ACS9050
MOON CLONE
code ACG6093
code ACG5454
code ACG5252
code ACG7059
B
LOCK
BLOCK KEY SELECTOR FOR WALL-INSTALLATION
BLOCK KEY SELECTOR TO BUILD-IN
F
IT SYNCRO
FIT SYNCRO PHOTOCELLS for the wall-installation
The range you can set is 10-20 m, 30÷60ft.
You can fit many couples close together thanks to the synchronising
circuit.
Add the SYNCRO TRANSMITTER
for more than 2 photocells couples (up to 4).
COUPLE OF BUILT-IN BOXES FOR THE FIT SYNCRO
P
AIR OF COLUMNS FOR FIT SYNCRO
H = 0,5 m
P
ROBE
PROBE
The probe detects the motor temperature to operate the heating system
under low temperature conditions, up to -30°C (connect to connector
J8).
G G
B B
code ACG1053
code ACG1048
code ACG8026
code ACG8028
code ACG8051
code ACG8057
code ACG4665