Télécharger Imprimer la page

VOLTCRAFT 2633260 Mode D'emploi page 21

Publicité

d) Laser
• When operating the laser equipment, always make sure that the laser beam is
directed so that no one is in the projection area and that unintentionally reflected
beams (e.g., from reflective objects) cannot be directed into areas where people
are present.
• Laser radiation can be dangerous, if the laser beam or its reflection enters un-
protected eyes. Therefore, before using the laser equipment, familiarise yourself
with the statutory regulations and instructions for operating such a laser device.
• Never look into the laser beam and never point it at people or animals. Laser
radiation can seriously damage your eyes.
• If laser radiation enters your eyes, close your eyes immediately and move your
head away from the beam.
• If your eyes have been irritated by laser radiation, do not continue to carry out
tasks with safety implications, such as working with machines, working from great
heights or close to high voltage. Also, do not operate any vehicles until the irrita-
tion has completely subsided.
• Do not point the laser beam at mirrors or other reflective surfaces. The uncon-
trolled, reflected beam may strike people or animals.
• Never open the device. Setting or maintenance tasks must only be executed by
a trained specialist familiar with potential hazards. Improperly executed adjust-
ments might result in dangerous laser radiation.
• The product is equipped with a class 2 laser. Laser signs in different languages
are included in the package. If the sign on the laser is not written in the language
of your country, please affix the appropriate sign onto the laser.
• Caution: if operation settings or procedures other than those described in these
instructions are used, it could lead to exposure to dangerous radiation.
21

Publicité

loading

Ce manuel est également adapté pour:

Dt-30lk