Velleman HAA920 Notice D'emploi page 8

3. Door Lock Out
• Machine No.: Use number keys or "▲""▼" key to enter the number of devices (machines). For
those using only 1 device, use the factory default (1). When multiple devices are used, the
number must be exactly the same as the number set in the software.
• Manager: set the number of Managers allowed on the system; default value is 5. In attendance
software, ordinary user can be permitted to be manager, please refer to Software Guide for
operation details.
• Select Language: set up the screen language.
• Select Voice: select the voice notification.
To remind the user whether the operation was correct or not by LCD display or voice notice
Select voice on: after a correct operation, the device will give a voice notice "Thank You".
After a failed operation, the device will give a voice notice "Press Again"
Select voice off: after a correct operation, a short "Bi, bi, bi..." sound can be heard. After a
failed operation, the device will give a long "Bi---" sound.
The device will resume work after 2 seconds or user can press either key to resume normal
operation immediately.
• LCD Backlight: set the screen contrast.
• Auto Shut Down: set up the auto shutdown function of the device, default setting is "off". A
time limit is set to determine after how much time without any operation the device will shut
down.
• PKey use: Enable or disable the power button on the front of the device.
Use the "▼▲" or number keys to select the "Verify" menu and press OK.
•
• Verify Fingerprint / Password: set verification method(s).
• Initialization: reset the programmed data to initial factory default values.
• Management Records Warning: setup the device to give users a warning when the total
manager record is almost full.
• Attendance Records Warning: setup the device to give users a warning when the total
attendance record is almost full.
• Repeat Confirmation Time: check whether the users have signed in or out repeatedly during
the set time period to avoid double entries.
• Door Lock Output: set whether the machine needs the door lock function and the time during
which the door lock control signal must remain on.
5.10.2.6 Information
Provides a way for the users to check the existing registration records, attendance records and
system details.
1. Storage Detail
2. Record Detail
3. System Detail
• Storage Details: to show the current registered data stored on the machine. Including the
number of registered user; the number of registered manager; number of registered fingerprints
and number of registered passwords.
• Records Details: consist of 5 options: the current attendance records, management records,
view attendance records, view management records and delete all records.
• System Details: – consist of 6 options: manufacturer; device name; release time, serial
number, Engine version and software version.
19.08.2014 – v. 3
HAA920
1. Time Setting
2. Lock Register
3. Time Group Set
4. Unlock Group
5. Unlock Time No
6. Lock Type Set
7. Access Mode
8
©Velleman nv