Communication Port - Velleman HAA920 Notice D'emploi

5. Overview
5.1

Communication Port

There are four communication ports for the fingerprint time attendance terminal:
5.2 Power Source Control
Turn on the device to attending status by pressing the power switch once.
•
When "Auto off" is selected, the machine will turn off automatically if no operation is detected
•
during a preset time-out.
• When in attending status, turn off the machine by pressing and holding the power button for more
than 4 seconds
5.3 Attendance Users
The users to the machine can be divided into "managers" and "users"
The "users" can only use the attendance (no management)
•
The "managers" can use both attendance and management
•
The "managers" can add or delete users' registered fingerprint or password, view data records or
system information as well as do settings.
5.4 Registering Ways
There are 2 registering ways for the machine, Fingerprint (FP) and Password (PWD).
Each user can register maximum 3 fingerprints and 1 password.
5.5 User ID and Password
The user ID number (Employee Number) is any number combination from 1 to 99999999, the
password is any number combination from 1 to 99999999.
5.6 Working status
There are 3 working modes: "Attending", "Managing" and "Locking"
5.6.1 Attending
The users can sign in/out by fingerprint or password; the LCD will show their registered users' ID.
The users' ID and attendance time are stored into the memory.
5.6.2 Managing
Register new users or modify user information, delete the registered data as well as view system
information and change settings.
Notes:
• Only managers can operate "Managing"
• Managers must pass the fingerprint or password confirmation before they can enter "Managing".
• When no manager is registered, any user can enter "Managing".
5.6.3 Locking
Under "Locking" status, only a PC can be used to control the device.
19.08.2014 – v. 3
1
USB port (download)
2 power plug
HAA920
3
TCP/IP port
4 RS232 / RS485
3
©Velleman nv