KitchenAid KSMSIA Guide Des Produits page 5

PRODUCT USAGE
ICE PUCK PREPARATION
1.
Fill the ice mold with water or flavoured ice base mixture of your choice.
NOTE: To keep the mold from overflowing while freezing, be sure not to fill past the fill line
visible just below the rim of the mold.
2.
Affix the lid to the top of the mold and place it in the freezer for 12 to 24 hours.
NOTE: Freezing time may vary and will depend both on the temperature of your freezer as
well as the sugar or alcohol content of your mixture.
5