Publicité
6 14 For VGK condensers install on the discharge line, between the compressor and the condenser the vibration damping
device and the silencer.
6 15 For installations at height, use elevating platforms, scaffolding or trestles.
6 16 To protect against indirect contacts the installer must provide a differential switch upstream of the machine panel with
adequate electrical characteristics (value in A referred to the electrical data of the installed fans, see Chapter 14 3 or label
on the fan).
6 17 Check that the power supply line is suitable for the electrical characteristics of the unit.
6 18 Check that all electrical connections are in accordance with applicable standards.
34
www.modine.com
Figure 8
Publicité
