Publicité
5 4
For handling with a forklift truck, the lifting brackets must be longer than the depth of the packaging and/or model.
6. Installation conditions
6 1
The model described in this manual is a component of a system and must be installed by authorised personnel only.
6 2
The model is fitted with axial fans that are not suitable to withstand additional static pressures and therefore it cannot be
channelled, air intake filters cannot be installed and in the area dedicated to installation there must be no strong currents
of air which are contrary to the flow of the motor fans.
6 3
Installation must be carried out preferably outside. In the event that the model is to be installed inside, it is essential to
provide an air intake that excludes any additional static pressure.
6 4
The base must be appropriate to the weight of the model when operational (see the drawing supplied with the model).
6 5
The equipment must be securely anchored to the support base, use all the fixing points. In order to prevent the transmission
of noise. Possibly use shock absorbers.
32
www.modine.com
Figure 5
Figure 6
Publicité
