Publicité
5. Handling and installation
5 1
The packed model must be moved by qualified personnel using a forklift truck of adequate capacity, or by crane and/or
overhead travelling crane (see Chapter 7). Avoid any sudden movement and do not stand near the manoeuvring area.
Always secure models to the lifting gear before handling. A large bump or strong push can cause the model to overturn.
5 2
If the model has been shipped within a container, use the two eyebolts "A" to pull the model out. Pull slowly without
jerking. Use a forklift truck (positioned at the side) or equivalent to pull the model out of the container. Unscrew bolts "B"
to free the slide.
A
A
5 3
Attach the crane to lifting points "C", lift the model and place it in its final location. Use all lifting points.
MAX
C
30°
60°
C
B
B
Figure 3
Figure 4
B
B
B
B
B
www.modine.com
B
31
Publicité
