Publicité
Connect the supplied earbuds to the 3.5mm auxiliary jack on the side of the Listening Check module.
7.
Place earbuds in ears of unaided listener.
8.
When the Listening Check module is attached, the processor immediately enters
listening check mode. If you are not using an AB myPilot to select the input
sound source, you will be listening to the input sound source configuration of
the first program. If you would like to listen to the other program sound source
configurations, use the program button to cycle through the programs.
9.
If the Naída CI is already connected to the Listening Check and paired to the AB
myPilot, the AB myPilot will switch to the Listening Check Menu screen once it
communicates with the Naída CI. This can be done by briefly pressing the power
button on the AB myPilot. Once the Listening Check screen is shown, you can
6
7
Publicité
