Parkside PDSS A1 Instructions D'utilisation Et Consignes De Sécurité page 18

Introduction / Safety advice
Air tool set PDSS A1
Introduction
Q
We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. only use the unit as described
and for the specified applications. If you pass the
product on to anyone else, please ensure that you
also pass on all the documentation with it.
Proper use
Q
This tyre inflator gauge is intended for pumping up
cycle tyres, inflatable boots, inflatable mattresses,
balls etc. The blow gun is intended for cleaning
and blowing out material from objects and difficult
to access places. Any other use or modification to
the device shall be considered as improper use and
could give rise to considerable risk of accident. We
will not accept liability for loss or damage arising
from improper use. The device is intended for private
domestic use only.
Features and equipment
Q
Gauge
1
Tyre inflator gauge
2
Deflator valve
3
Plug-in nipple
4
5 Hose with valve connector, straight
Trigger
6
Blow gun
7
Extension nozzle
8
Accessory:
Cap for , ,
9 14 15 16
Ball needle
10
Universal adapter,
11
for valves with internal Ø of approx. 9 mm
18 GB
All manuals and user guides at all-guides.com
12
13
14
15
16
Q
1 Tyre inflator gauge
1 Blow gun
2 Extension nozzles
1 Adapter set (8-piece)
1 operating instructions
Q
Working pressure:
Compressed air quality: Cleaned, oil- and
Volume flow rate:
Sound pressure level:
Sound power level:
Values determined in accordance with EN 14462
(EN1953/A1:2009).
Q
and instructions could result in serious injury and /
or damage to property.
Keep all the safety advice and instructions
in a safe place for future reference!
Universal adapter,
for valves with internal Ø of approx. 6 mm
Valve adapter, e.g. for cycle tyre valves
Universal adapter.
for valves with internal Ø of approx. 8 mm
Adapter for screw valves, e.g. on inflatable
dinghies
Adapter for deflator valves
Included items
Technical data
Max. 8 bar
condensate-free
Typically 170–300
Ltr. / Min.
86 dB(A)
98 dB(A)
Safety advice
safety advice and instructions.
Failure to observe the safety advice
check the air pressure with
a suitable manometer after filling.
DANGER OF SUFFOcA-
TION! Working with nitrogen presents
Read all the