Hach SL250 Manuel D'utilisation Simplifié page 9

Section 5 User interface and navigation
5.1 Display description
Refer to Figure 4 and
Figure 4 Measurement screen (top part)
1 Date and time
2 Battery status
3 USB (COM port) active connection icon when
communication class is selected
4 Progress bar (not completed measurement)
5 Calibration status icon (calibration not correct)
6 Secondary measurement (user-selected parameter)
Figure 5 Measurement screen (lower part)
1 Probe icon, port number, parameter or probe name
2 Calibration status icon (calibration correct)
3 Secondary measurement value (user-selected
parameter)
4 Tertiary measurement value (user-selected
parameter)
5 Right and left arrows to select the applicable site ID
6 Options (contextual: Read, select, OK, delete)
7 Checkmark: Completed measurement on site
Figure 5 for the measurement screen description.
7 Primary measurement value (user-selected
parameter)
8 Stability icon with warning icon and warning
message
9 Probe icon, port number, parameter or probe name
10 Slot number, parameter name and chemical
symbol
11 Very important message for devices (followed by
error and then warning message)
8 Active arrow keys
9 Site ID icon and site name
10 Routes icon (shows when routes is set to on)
11 Options (contextual: Details, exit, cancel, select,
deselect)
12 Primary measurement value (user selected)
13 Stability icon
English 9