1
B C A
2
D
1
3
A
A
B
C
D
1
Use the tether to attach the stylus to the computer (only for model with
touchscreen)
Use the tether to attach the stylus to the computer so you will not lose it. Before attaching the pen (A),
take out it from the pen holder (B). There is a tether hole (C) to attach it.
1
3
2
Open the display
2
A Push the top of the latch (D) to release it.
B Hold the side/handle of the computer with either of your hands and then lift up the display to open.
IMPORTANT
l Do not open the display wider than necessary (180° or more), and do not apply excessive pressure to the
LCD. Do not open or close the computer holding the edge of the LCD segment.
3
Connect your computer to a power outlet
A Connect the power cord and AC adaptor.
Hold the plug
B Open the cover.
C Connect the AC adaptor to the DC-IN jack
D Connect your computer to a power outlet.
The shape of AC Plug and AC Outlet depend on the country.
The battery charging starts automatically.
IMPORTANT
l Do not disconnect the AC adaptor until the first-time operation procedure is completed.
l When using the computer for the first time, do not connect any peripheral device (including wired LAN
cable) except the battery pack and AC adaptor.
B
l Handling the AC adaptor
Problems such as sudden voltage drops may arise during periods of thunder and lightning. Since this could
adversely affect your computer, an uninterruptible power source (UPS) is highly recommended unless run-
ning from the battery pack alone.
l When the DC plug is not connected to the computer, disconnect the AC cord from your electrical outlet.
Power is consumed simply by having the AC adaptor plugged into an electrical outlet.
2
4
of the power cord, and securely insert it straight to the end.
A
of the computer.
B
13