KYRA MEDICAL k-tek KTEK2501 Mode D'emploi page 6

Les langues disponibles

INSTRUCTIONS FOR USE

3.3 Device Maintenance

Make sure that all labels are installed and can be read. Replace labels as necessary by

using a plastic scraper to remove the label. Use an alcohol wipe to remove any adhe-

sive residue.

Contact Kyra Medical, Inc., if you need to repair or replace the device contact us using

the information from the contact details section.

3.3 Cleaning and Disinfection:

WARNING:

• After each use, clean the device as directed in this instruction for use.

• Do not submerge the device in liquid. Equipment damage can occur.

• Use caution in areas where liquid can get into the mechanism.

• Do not use bleach or products that contain bleach to clean the device. Injury or

equipment damage can occur.

• Make sure that the device is dry before you store it or use it again.

Wipes:

• Wipes may contain up to 2% sodium hypochlorite.

• Wipes may contain benzalkonium chloride (< or = 0.6% conc.) and didecyl dimethyl

ammonium chloride (up to 0.6% conc.)

• Wipes may contain benzalkonium chloride (up to 0.6% conc.), didecyl dimethyl

ammonium chloride (up to 0.6% conc.) and may also contain polyhexamethylene

biguanide (up to 0.6% conc.).

Sprays:

• Sprays may contain up to 2% sodium hypochlorite.

• Sprays may contain up to .2% benzalkonium chloride and up to 0.2% didecyl

dimethyl ammonium chloride (quaternary ammonium chloride solution (QACs) and

may also contain polyhexamethylene biguanide (up to 0.6% conc.).

• Sprays may contain up to 2% hydrogen peroxide.

Read the cleaning product's directions and follow the instructions on the label. Use cau-

tion in areas where fluid migration may occur:

Wipe device with a clean, dry cloth. Make certain the product is dry prior to reinstalling

to avoid damage.

CAUTION: Damage may result if product is cleaned with caustic chemicals or harsh

abrasives

ATTENTION: If any KTEK product is damaged or appears to be functioning abnormally,

discontinue use and contact KYRA Customer Service at 1-508-936-3550.

IFU 03-0376 REV H