Publicité
Les langues disponibles
Les langues disponibles
The product must be used and
rested on a flat, stable surface.
When placing the product on
its base, ensure that the surface
on which the base is placed is
stable.
The product is not to be used
if it has been dropped, if there
are visible signs of damage or
if it is leaking.
Ensure the rated voltage shown
on the rating label corresponds
with the voltage of the mains
supply.
The product demands
increased energy consumption.
Do not connect any other
devices (e.g. heaters, air
conditioners, etc.) to the same
circuit.
Do not operate any product
with a damaged mains cord
or plug, when the product
malfunctions or has been
damaged in any manner.
The use of extension cords is
not recommended. If the use of
an extension cord is necessary,
it must be designed for a
current flow of at least 10 A.
Lay cords in such a way that
they may not be tripped over
or otherwise damaged.
Only use the product in dry
indoor rooms.
Do not operate the product
with wet hands or while
standing on a wet floor. Do not
touch the mains plug with wet
hands.
Always turn off the product
before disconnecting it from
the mains supply.
Regularly check the mains
plug and the supply cord for
damages.
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard.
Protect the mains cord against
damages. Do not let it hang
over sharp edges, do not
squeeze or bend it. Keep the
mains cord away from hot
surfaces and open flames and
ensure that nobody can pull on
or trip over it unintentionally.
Stop using the product if the
anti-kink protection on the
mains cord is damaged!
Do not pull the mains plug
out of the socket-outlet by the
mains cord. Do not wrap the
mains cord around the product.
Protect the product, its mains
cord and mains plug against
dust, direct sunlight, dripping
and splashing water.
GB/IE/NI
9
Publicité
