3.6.1
Mounting or removing the footrests
Mounting the footrests is done as follows:
1. Hold the footrest sideways at the outside of the
wheelchair's frame and mount the tube hood into the
frame.
2. Swing the footrest inwards until it clicks in position.
3. Swing the footplate downwards.
To take off the footrests:
1. Pull lever .
2. Swing the footrest to the outside of the wheelchair until
it comes loose from the guidance.
3. Pull the footrest from the tube hood .
To remove the armrest:
1. Grasp the arm pad and pull the armrest gently out of the
armrest support.
3.6.3
Backrest height
The backrest height can be adjusted into 5 positions.
1. Remove the star knob (1).
2. Slide the backrest upholstery up/down to the desired height.
Make sure that the hole for the star knob in the frame tube
aligns with one of the holes in the upholstery.
3. Replace the star knob and retighten.
3.6.2 Mounting or removing the armrests
The armrests of the wheelchair can be mounted by following
instructions.
1. Mount the armrest in the armrest support until the
screw fits in the sleeve .
2. Make sure the armrest is firmly fixated.
13
EN
Verso
2024-07
Using your wheelchair
NL
1