Simons Voss Technologies LockNode SmartHandle AX Advanced Guide Abrégé page 48

3. Fitting the LockNode
sioning instructions. Pass these instructions and any main-
tenance instructions to the user.
3. Fitting the LockNode
ü Special tool at hand.
1. Insert the special tool into the cover inlay on the elec-
tronics side.
1
2. Use the special tool to carefully bend the cover inlay up-
wards.
2
3. Slide the cover downwards.
3
Cover unlocked.
9
4. Remove the cover.
4
5. Use the special tool to unhook the reader module clip.
5
6. Remove the reader module.
6
7
48 / 108 | EN