SilverCrest SV 60 A1 Instructions De Montage, D'utilisation Et Consignes De Sécurité page 24

Regularly check the power plug
and power cord for damage .
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent or
similarly qualified persons in order
to avoid a hazard .
Protect the power cord against
damages . Do not let it hang over
sharp edges, do not squeeze or
bend it . Keep the power cord
away from hot surfaces and
open flames and ensure that
nobody can pull on or trip over it
unintentionally .
If the power cord should overheat,
stop using the product and
disconnect the product from the
electrical outlet .
Do not pull the power plug out of
the electrical outlet by the power
cord . Do not wrap the power cord
around the product .
22 GB/IE
Protect the product, its power
cord and power plug against
dust, direct sunlight, dripping and
splashing water .
For safety reasons, it is
recommended not to remove the
safety grille/guard . However, if
you need to remove it, ensure that
the product is switched off from
the supply mains before removing
the grille/guard .
Never use the product without the
safety grille or with a damaged
safety grille .
Place the product on a firm, level
and stable surface to prevent
overturning during operation .
Keep the product at least 50 cm
away from any objects (curtains,
walls, etc .) .
During use, keep hands, hair,
clothing and utensils away from
the safety grille to avoid injuries
and damage of the product .