Publicité
Les langues disponibles
Les langues disponibles
5. SETTINGS AND SPECIAL FUNCTIONS
DATE
Set date
The display will show the date in the format
dd:mm:yy (day:month:year), the day will blink. Use
the Up/Down buttons
to modify the setting, con-
firm with Enter
to go on to the next setting; once
the year is confirmed the date will be set.
How to set the date
Show date
Using this function it is possible to deactivate/acti-
vate the date visualization on the display.
How to activate the date
How to deactivate the date
TIME
Set time
The display shows the hours and minutes in the for-
mat hh:mm and with hh: blinking. Use the Up/Down
buttons to modify the setting and then confirm by
pressing Enter
to go on to the next setting.
Once the minutes are confirmed, the time will be
set.
How to set the time
Set 12/24
This function selects the display at 12 or 24 h.
How to set the display to 12 h
16
www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)
How to set the display to 24 h
Show Time
Through this function it is possible to activate/de-
activate the constant visualization of the time.
How to activate the permanent time
How to deactivate
LANGUAGE
The function allows selection of the language for
the display messages.
Italian
English
French
German
Spanish
SET °C/°F
This function permits visualizing the temperature
in Centigrade or Fahrenheit degrees. Normally, the
appliance is set for visualization in centigrade de-
grees.
How to set the temperature in Centigrade
How to set the temperature in Fahrenheit
Keypad lock
Through this function it is possible to activate/de-
activate the keypad lock.
How to activate
keypad lock
How to deactivate
keypad lock
www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)
6. INTERNAL LAYOUT
6.1 Internal Layout (positioning, adjust-
ment, removal)
Fresco Drawer
1T / 0T / 0H models
Fixed to the slide guides with two thumbscrews.
>
to remove the drawer, unscrew the thumbscrews
and remove the drawer.
TriMode Drawer
modelli 1T / 0T / 0H
The upper TriMode can be removed using the same
method used for the Fresco drawer
>
to remove the inner TriMode drawer unscrew the
thumbscrews.
When replacing the drawers, make certain the
back of the drawers engage under the clips on the
slide guides.
Ice Tray
Located in the upper drawer of the freezer com-
partment
>
after removal, make sure to reposition it correctly.
Warning
Do not place hands or fingers near the Ice-
maker when in function.
17
EN
Publicité
