Publicité
Les langues disponibles
Les langues disponibles
In case the compartment is used as refrigerator
or Crisper-Fresco compartment (TriMode fun-
ction) the recommended and preset temperatu-
res will correspond to those indicated for the re-
spective compartments.
The temperature shown can vary slightly in
respect to the set temperature following fre-
quent openings of the doors or insertion of
room temperature foods or large quantities
of foods.
6 to 12 hours are necessary to reach the se-
lected temperature.
4.3 Ice Maker Activation (optional)
The Ice Maker button
located on the main con-
trol panel permits activation of the automatic ice-
maker.
The button is illuminated when the icemaker is
functioning.
A prewash of the water circuit should be perfor-
med before activating the Ice Maker for the first
time. To do this touch at the same time buttons
Enter
and Ice Maker
.
After a few minutes the Ice Maker can be activa-
ted.
For freezer models 0F
...
Important
Do not activate the Ice Maker unless
the appliance is connected to the water
mains.
4.4 Information and malfunction mes-
sages on the display
An integrated control system provides informa-
tion through light signals or text messages vi-
sualized on the display.
The information signal is always visualized with
a fixed text message, while a malfunction signal
is visualized with blinking text. The sound signal
that accompanies some malfunction signals can
be deactivated by pressing the Alarm button
12
www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)
5. SETTINGS AND SPECIAL FUNCTIONS
on the main control panel.
The list of malfunction signals is located at the
back of this manual.
5.1 Customization and language set-
tings
To prevent an inadvertent change to the set-
tings the keypad is automatically locked after
a certain period of time.
To re-activate the Menu function, press simul-
taneously the Menu button
and the Down
button
for at least three seconds.
The key lock can be disabled through the spe-
cific function in the Settings menu.
It is possible to customized the functions of your
Fhiaba to adapt it to diverse usage needs, reset-
ting the main parameters (Settings) or activating
special functions (Functions).
Functions are visualized on the main display by
pressing the Menu button
.
The Up/Down buttons permit scrolling the avai-
lable functions, which can be selected by pres-
sing the Enter button
. The display visualizes
the current functioning status.
Using the Up/Down buttons , it is also possible
to scroll through the selected function, activating
or deactivating by pressing the Enter button
Once the function is confirmed, the display will
automatically visualize the main menu to select
other functions.
At any time it is possible to return to the previous
selection through the FhiabaAccess button
.
The language of the messages appearing on the
display can be changed by operating as follows:
Enter the Menu by pressing the Menu button
select Settings via the Up/Down buttons
and
confirm via Enter
. Then select the Language
function and the desired language.
5.2 Special functions activated through
the Menu
To use special functions, select the Menu button
and use the Up/Down button
menu, confirming the selection Functions.
Shopping Fridge
The function lowers the refrigerator temperatu-
re to +2°C (35.6°F) for 12 hours, permitting more
rapid cooling of food that has just been placed
in. Once the 12 hours have expired, the function
deactivates automatically, returning to the pre-
viously set temperature. It is possible to program
a timed activation of the function. After a prolon-
ged interruption of electrical current, it is neces-
sary to reactivate the function.
How to activate
How to deactivate
How to program timed activation
It is possible to program the function with a delay
of 1 to 12 hours.
The various Shopping Modes help prepare the
cooling, Fridge and TriMode compartments
for the introduction of a heat load which can
consist of fresh food or other items which
may have warmed during transport. The
.
more quickly an item can be cooled or frozen
the better it will be preserved.
This mode can also be effective at maintai-
ning compartment temperatures while enter-
taining when higher than average door and
drawer openings are anticipated.
Vacation Fridge
This function (recommended in case of prolonged
absences since it allows considerable energy sa-
vings) brings the TriMode compartment tempera-
ture to - 18°C (46.4°F).
It is possible to program the duration, or it can be
www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)
manually deactivated upon re-entry after a pe-
riod of absence.
This function remains active even if during the
period of absence there is a prolonged interrup-
tion of electrical power.
to access the
How to activate
How to deactivate upon re-entry
How to program the duration
It is possible to program a period from 1 to 90
days.
Shopping TriMode
This function must be activated at least 24 hours
before inserting room temperature items into the
freezer, or several hours before placing into the
freezer previously frozen items which have been
subject to a slight temperature rise. This function
is automatically deactivated when the program-
med time period expires. It is possible o program
timed activation of the function.
If interrupted by a prolonged interruption of the
electrical power, it is necessary to reactivate the
function.
How to activate
How to deactivate
How to program timed activation
It is possible to program the function with a delay
of 1 to 12 hours.
EN
13
Publicité
