Motorola CP140 Mode D'emploi page 13

TURNING THE RADIO ON/OFF
ON
Rotate the On/Off/
Volume Control knob
clockwise until you
hear a click.
OFF
Rotate the On/Off/
Volume Control knob
counterclockwise until
you hear a click. The
display clears and the
LED indicators turn off .
Adjusting the Volume
Turn the On/Off/Volume Control knob clockwise to
increase the volume, or counterclockwise to
decrease the volume.
– –
or use the pre-programmed Volume Set button:
1 Hold down the Volume Set
hear a continuous tone.
2 Turn the On/Off/Volume Control knob to the
desired volume level.
3 Release the Volume Set button.
Radio On Message (CP160/CP180)
At power up the radio may display a message
customised by your dealer, e.g.:
RADIO ON
After this text has been displayed, the radio
performs a self test routine. During the routine the
Green LED lights. On completion of a successful
self test the radio produces the Self-Test pass Tone,
the Green LED indicator goes out and the display
shows the channel that was in use at power down,
typically:
CHAN
This may be a number or an alias and will be the
current channel.
button
. You will
32
English
11